Order Products : sales@su-jiao.com

Baytec® WE-180

Category:	PUR-Ether/MDI , Polyurethane (Polyether, MDI)
Manufacturer:	Covestro - PUR
Trademark:	Baytec®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6dB3sh_Baytec-WE-180.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Baytec WE-180 is a dicyclohexylmethane diisocyanate (HMDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG). It is used in the formulation of two-component elastomer and binder systems. Polyurethanes from Baytec WE-180 prepolymer can be made optically clear, light-stable, and weather-resistant. They can range from rigid to flexible depending on the coreactant used. Typical uses include soft, energy-absorbing elastomers laminates for safety glasses, binders for dialysis filters and window gaskets. The material 's low viscosity allows for easy production of complex parts with good surface definition. As with any product, use of the Baytec WE-180 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Message

Baytec WE-180 is a dicyclohexylmethane diisocyanate (HMDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG). It is used in the formulation of two-component elastomer and binder systems. Polyurethanes from Baytec WE-180 prepolymer can be made optically clear, light-stable, and weather-resistant. They can range from rigid to flexible depending on the coreactant used. Typical uses include soft, energy-absorbing elastomers laminates for safety glasses, binders for dialysis filters and window gaskets. The material 's low viscosity allows for easy production of complex parts with good surface definition. As with any product, use of the Baytec WE-180 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

General Information
Forms	Liquid

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore D)	72		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	21.4	MPa	ASTM D412
Tensile Elongation (Break)	100	%	ASTM D412
Tear Strength ¹	121	kN/m	ASTM D624
Bayshore Resilience	58	%	ASTM D2632

Additional Information
Appearance: Colorless to pale yellow liquidSpecific Gravity @ 25°C: 1.055Viscosity @25°C: 800 to 900 mPaFlash Point, PMCC: >255°CNCO: 18.3 to 18.9 wt%

Note Message
1 .	C mould

Resin Grade	Manufacturer	Category	Trademark
Monprene® CP-10180 X (PRELIMINARY DATA)	Teknor Apex Company	TPE	Monprene®
Zytel® HTN FE8200 NC010	DuPont Performance Polymers	PPA	Zytel® HTN
DOMAMID® 66STZX	DOMO Engineering Plastics SPA	Nylon 66	DOMAMID®
Hostacom ERC 198N	LyondellBasell Industries	PP Copolymer	Hostacom
Pebax® 4033 SA 01 MED	Arkema	PEBA-Ether	Pebax®