Order Products : sales@su-jiao.com
D-MEC SCR802
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | D-MEC Ltd. |
| Trademark: | D-MEC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6Yqo0s_D-MEC-SCR802.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: For direct mold Laser: Ar/solid-state Post-cure: Heating |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density 1 | 1.59 | g/cm³ | |
| Viscosity 2(25°C) | 4.80 | Pa·s |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Critical Exposure | 9.00 | mJ/cm² | |
| Penetration Depth | 152.0 | µm |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 92 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | 9200 | MPa | |
| Tensile Strength | 85.0 | MPa | |
| Tensile Elongation (Break) | 2.0 | % | |
| Flexural Modulus | 8900 | MPa | |
| Flexural Strength | 120 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 250 | °C | |
| Glass Transition Temperature | 133 | °C | DMA |
| Note Message | |
|---|---|
| 1 . | Liquid Resin |
| 2 . | Liquid Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNISOFT TPE™ ST-59A-BK-3-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| Diakon® MG102 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| HiFill® HDPE GF30 | Techmer Engineered Solutions | HDPE | HiFill® |
| Kumho ABS 775 | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| POLYCASA® XT SBW | Polycasa | Acrylic (PMMA) | POLYCASA® |
