Order Products : sales@su-jiao.com
Quadrant EPP Ertalyte® TX
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6XgAOw_Quadrant-EPP-Ertalyte-TX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP Ertalyte® TX is a Polyethylene Terephthalate (PET) product. It is available in Europe or North America. Typical application: Food Contact Applications. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.44 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr, 3.00 mm | 0.060 | % | |
| Saturation, 23°C | 0.47 | % | |
| Equilibrium, 23°C, 50% RH | 0.23 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 3.00 mm 1 | 0.13 | % | |
| 23°C, 3.00 mm 2 | 11.0 | mg | |
| 23°C, 3.00 mm 3 | 5.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature - Minimum | -20 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, 10.0 mm) | 94 | ISO 2039-2 | |
| Ball Indentation Hardness (10.0 mm) | 160 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 4 | 3450 | MPa | ISO 527-2/1B/1 |
| Tensile Stress 5(Break) | 76.0 | MPa | ISO 527-2/1B/5 |
| Tensile Strain 6(Break) | 7.0 | % | ISO 527-2/1B/5 |
| Tensile Creep Modulus (1000 hr) | 23.0 | MPa | ISO 899-1 |
| Compressive Stress | ISO 604/1 | ||
| 5% Strain | 95.0 | MPa | |
| 2% Strain | 47.0 | MPa | |
| 1% Strain | 24.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | > 30 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength 7 | 2.5 | kJ/m² | ISO 180/2A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 8(1.8 MPa, Unannealed) | 75.0 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 9 | 100 | °C | |
| -- 10 | 115 | °C | |
| -- 11 | 160 | °C | |
| Melting Temperature (DSC) | 255 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 6.5E-5 | cm/cm/°C | |
| 23 to 100°C | 8.5E-5 | cm/cm/°C | |
| Thermal Conductivity (23°C) | 0.29 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 12 | > 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity 13 | > 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength 14(1.00 mm, in Oil) | 21 | kV/mm | IEC 60243-1 |
| Relative Permittivity 15 | IEC 60250 | ||
| 100 Hz | 3.40 | ||
| 1 MHz | 3.20 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz 16 | 1.0E-3 | ||
| 1 MHz 17 | 0.014 | ||
| Comparative Tracking Index 18 | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | HB | ||
| 6.00 mm | HB | ||
| Oxygen Index | 25 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | 96 hrs |
| 2 . | Weight, 96 hrs |
| 3 . | Weight, 24 hrs |
| 4 . | Dry |
| 5 . | Conditioned at 23°C/50%RH |
| 6 . | Dry |
| 7 . | Dry |
| 8 . | Dry |
| 9 . | 20000 hrs |
| 10 . | 5000 hrs |
| 11 . | Short periods |
| 12 . | Dry |
| 13 . | Dry |
| 14 . | Dry |
| 15 . | Dry |
| 16 . | Conditioned at 23°C/50%RH |
| 17 . | Dry |
| 18 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMV BLK T | Arkema | Nylon 11 | Rilsan® |
| Starflam P10002EP | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| FRblend® PP-1501 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP, Unspecified | FRblend® |
| KOPA® KN133G8ST | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Polifor® L6 GF/50 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
