Order Products : sales@su-jiao.com
Badamid® PA610
| Category: | Nylon 610 , Polyamide 610 |
| Manufacturer: | Bada AG |
| Trademark: | Badamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6XA5Bi_Badamid-PA610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Badamid® PA610 is a Polyamide 610 (Nylon 610) material. It is available in Europe for injection molding. Primary attribute of Badamid® PA610: Flame Rated. |
| General Information | |
|---|---|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.07 | -- | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.40 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2000 | 1600 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 60.0 | 50.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Yield, 23°C) | 100 | > 100 | % | ISO 527-2/1A/50 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 16 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | -- | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 175 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 70.0 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) 1 | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity (1.00 mm) | 1.0E+13 | -- | ohms·cm | IEC 60093 |
| Electric Strength (1.00 mm) | 30 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 550 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.800 mm | HB | -- | ||
| 1.60 mm | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 250 to 290 | °C | |
| Mold Temperature | 60.0 to 90.0 | °C |
| Note Message | |
|---|---|
| 1 . | 10 K/Min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® DN4580 | Zeon Chemicals L.P. | NBR | Nipol® |
| Elastron® G G200.A70.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Lucent TPO TPO-20NBS | Lucent Polymers, Inc. | Polyolefin, Unspecified | Lucent TPO |
| POLYAXIS® LP 624 | A. Schulman Inc. | HDPE | POLYAXIS® |
| RTP 199 X 142299 A | RTP Company | PP, Unspecified | RTP |
