Order Products : sales@su-jiao.com
UPES® IP-73-UHP
| Category: | PS+PE , Polystyrene + PE |
| Manufacturer: | NOVA Chemicals |
| Trademark: | UPES® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6WAhLB_UPES-IP-73-UHP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPES® IP-73-UHP is a Polystyrene + PE (PS+PE) material. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D6226 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | < 0.10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(Injection Molded) | 1900 | MPa | ASTM D638 |
| Tensile Strength 2(Break, Injection Molded) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 120 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1740 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, Injection Molded) | 51.7 | MPa | ASTM D790 |
| Flexural Strain - Yield 5 | > 5.0 | % | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (Injection Molded) | 340 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 81.4 | °C | ASTM D1525 6 |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | 5.1 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 0.05 in/min, Injection Molded |
| 6 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2805 MAS152 | Covestro - Polycarbonates | PC | Makrolon® |
| RTP 4000 A | RTP Company | PPA | RTP |
| RTP PA6 HI 30 GF BLK | RTP Company | Nylon 6 | RTP |
| ChronoPrene™ 25A | CardioTech International, Inc. | TPE | ChronoPrene™ |
| Plaslube® PA4/6 GF33 TL15 | Techmer Engineered Solutions | Nylon 46 | Plaslube® |
