Order Products : sales@su-jiao.com
PermaStat® 2700-55A
| Category: | TES , Styrenic Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6Vk6IP_PermaStat-2700-55A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.2 - 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 2.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | No Break | ASTM D256 | |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+10 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Static Decay MIL-PRF-81705D, FTMS-4046.1: <2 sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 - 191 | °C | |
| Middle Temperature | 160 - 191 | °C | |
| Front Temperature | 160 - 191 | °C | |
| Mold Temperature | 16.0 - 66.0 | °C | |
| Injection Pressure | 34.0 - 69.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205.3 | RTP Company | Nylon 66 | RTP |
| Mirakutoran® TPU E480 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Sinvicomp SBC3715 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Moplen EP400M | PolyMirae | PP Copolymer | Moplen |
| Hapflex™ 650 | Hapco Inc. | TP, Unspecified | Hapflex™ |
