Order Products : sales@su-jiao.com
Orgalloy® R 60ES
| Category: | Nylon 6 Alloy , Polyamide 6 Alloy |
| Manufacturer: | Arkema |
| Trademark: | Orgalloy® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6UaH9a_Orgalloy-R-60ES.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Orgalloy® R 60ES is a Polyamide 6 Alloy (Nylon 6 Alloy) product. It can be processed by blow molding, extrusion, film extrusion, profile extrusion, or sheet extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: heat resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1030 | 1030 | kg/m³ | ISO 1183 1 |
| Melt volume-flow rate (235°C/2.16 kg) | 2.00 | -- | cm³/10min | ISO 1133 2 |
| Water Absorption | ISO 62 3 | |||
| Saturation | 3.3 | -- | % | |
| Equilibrium | 1.3 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | -- | 2000 | MPa | ISO 527-2 4 |
| Tensile Stress (Yield) | -- | 50.0 | MPa | ISO 527-2 5 |
| Tensile Strain (Yield) | -- | 4.0 | % | ISO 527-2 6 |
| Nominal strain at break | -- | > 50 | % | ISO 527-2 7 |
| Tensile Creep Modulus | ISO 899-1 8 | |||
| 1 hr | -- | 2030 | MPa | |
| 1000 hr | -- | 870 | MPa |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 9 | |||
| 0.45 MPa | 130 | -- | °C | |
| 1.8 MPa | 75.0 | -- | °C | |
| Vicat Softening Temperature (50°C/h, B (50N)) | 129 | -- | °C | ISO 306 10 |
| Melting Temperature 11 | 220 | -- | °C | ISO 11357-3 12 |
| CLTE | ISO 11359-2 13 | |||
| Flow | 9.3E-5 | -- | cm/cm/°C | |
| Transverse | 1.3E-4 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface resistivity | -- | > 1.0E+15 | ohms | IEC 60093 14 |
| Volume resistivity | -- | > 1.0E+13 | ohms·m | IEC 60093 15 |
| Electric strength | 38 | 38 | kV/mm | IEC 60243-1 16 |
| Relative Permittivity | IEC 60250 17 | |||
| 100 Hz | -- | 3.00 | ||
| 1 MHz | -- | 3.00 | ||
| Dissipation Factor | IEC 60250 18 | |||
| 100 Hz | -- | 0.062 | ||
| 1 MHz | -- | 0.025 | ||
| Comparative tracking index | -- | 600 | IEC 60112 19 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Behav. at 1.6mm nom. thickn. (1.60 mm) | HB | -- | ISO 1210 20 | |
| Burning Behav. at thickness h (3.20 mm) | HB | -- | ISO 1210 21 |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | 10 °C/min |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 15 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 16 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 17 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 18 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 19 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 20 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 21 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SI00VI02BHC | Triesa Plastics | Nylon 6 | BESTNYL |
| Epolene® EE-2 | Westlake Chemical Corporation | MDPE | Epolene® |
| IROGRAN® A 95 H 4678 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| Plaslube® PA6/12 GF33 1001 BK | Techmer Engineered Solutions | Nylon 612 | Plaslube® |
| Plexiglas® Resist zk6HF | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
