Order Products : sales@su-jiao.com
Arlon® 51N
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Arlon-MED |
| Trademark: | Arlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6MNbAQ_Arlon-51N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 51N is a non-DICY multifunctional epoxy low-flow prepreg system designed to provide high reliability through lead-free solder operations. The high decomposition temperature and high thermal stability of this material is ideal for use in complex rigid-flex fabrication and assembly operations where minimum resin flow is required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792A |
| Water Absorption (24 hr) | 0.15 | % | Internal Method |
| Decomposition Temperature | Internal Method | ||
| 5% | 368 | °C | |
| Initial | 354 | °C |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength | Internal Method | ||
| -- 1 | 1.2 | kN/m | |
| -- 2 | 1.1 | kN/m | |
| -- 3 | 1.6 | kN/m |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Expansion Rate (50 to 260°C) 4 | 2.6 | % | Internal Method |
| T260 | > 1.0 | hr | Internal Method |
| T288 | > 30.0 | min | Internal Method |
| T300 | 15.0 | min | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 17900 | MPa | Internal Method |
| Tensile Strength | 44.8 | MPa | Internal Method |
| Flexural Strength | 579 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | Internal Method | ||
| -- | 166 | °C | |
| -- 5 | 170 | °C | |
| CLTE - Flow | |||
| -- 6 | 1.3E-5 to 1.5E-5 | cm/cm/°C | Internal Method |
| < 166°C 7 | 4.4E-5 | cm/cm/°C | Internal Method |
| > 166°C 8 | 2.5E-4 | cm/cm/°C | Internal Method |
| Thermal Conductivity (100°C) | 0.25 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | Internal Method | ||
| -- 9 | 4.0E+12 | ohms | |
| -- 10 | 2.9E+13 | ohms | |
| Volume Resistivity | Internal Method | ||
| -- 11 | 3.3E+6 | ohms·cm | |
| -- 12 | 2.6E+13 | ohms·cm | |
| Dielectric Strength | 39 | kV/mm | Internal Method |
| Dielectric Constant | Internal Method | ||
| 1 MHz | 4.20 | ||
| 1.00 GHz | 4.10 | ||
| Dissipation Factor | Internal Method | ||
| 1 MHz | 0.020 | ||
| 1.00 GHz | 0.020 | ||
| Arc Resistance | > 120 | sec | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | At Elevated Temperatures |
| 2 . | After Process Solutions |
| 3 . | After Thermal Stress |
| 4 . | Z-axis |
| 5 . | TMA |
| 6 . | Y-axis |
| 7 . | Z-axis |
| 8 . | Z-axis |
| 9 . | E24/125 |
| 10 . | C96/35/90 |
| 11 . | E24/125 |
| 12 . | C96/35/90 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TERRAMAC TP-4030 | UNITIKA Plastics Division | PLA | TERRAMAC |
| NEFTEKHIM PE 6948C (486H3) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
| BFI 3271 | Blueridge Films Inc. | PP Impact Copolymer | BFI |
| Clyrell RC5003 | LyondellBasell Industries | PP Random Copolymer | Clyrell |
| EPLAMID 6 CFR 20 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
