Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion 8700A
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6Ltx6g_Geon-Vinyl-Rigid-Extrusion-8700A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™Vinyl Rigid Extrusion 8700A is a rigid PVC product,. It can be processed by extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Geon™The application areas of Vinyl Rigid Extrusion 8700A include the automotive industry and water pipes/pipes/drinking water. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 16344 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 111 | ASTM D785 | |
| Durometer Hardness (Shore D, 15 sec) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2690 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 42.7 | MPa | ASTM D638 |
| Flexural Modulus | 2620 | MPa | ASTM D790 |
| Flexural Strength | 75.8 | MPa | ASTM D790 |
| Compressive Strength | 55.8 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18mm, molded | 59 | J/m | ASTM D256A |
| 0°C, 3.18mm, molded | 85 | J/m | ASTM D256A |
| 23°C, 3.18mm, molded | 910 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 35.6 | J/cm | ASTM D4226 |
| 23°C 4 | 35.6 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 72.8 | °C | ASTM D648 |
| CLTE - Flow | 6.7E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 27 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 3.90 | ASTM D150 | |
| 1 kHz | 3.30 | ASTM D150 | |
| Dissipation Factor 5 | ASTM D150 | ||
| 30°C, 60 Hz | 0.029 | ASTM D150 | |
| 30°C, 1 kHz | 0.040 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.711mm, all | V-0 | UL 94 | |
| 1.50mm, all | 5VA | UL 94 | |
| CSA Flammability 6(870.0 µm) | V-0 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Excellent | ||
| 注释：汽车OEM认证。注释：按特定颜色获取NSF清单。请联系普立万公司获取该产品已认证颜色的最新清单。注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 179 - 182 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| 5 . | 24 hours |
| 6 . | All colors |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM PS 5560 | Ponachem Compound GmbH | PS (HIPS) | PONACOM PS |
| Wondel® C CR0K | Nanjing Julong Engineering Plastics Co., LTD | PC Alloy | Wondel® C |
| HiFill® ECTFE GF25 | Techmer Engineered Solutions | ECTFE | HiFill® |
| INEOS Wire & Cable BPD3669 | INEOS Olefins & Polymers Europe | LLDPE | INEOS Wire & Cable |
| LNP™ THERMOCOMP™ D351 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ THERMOCOMP™ |
