Order Products : sales@su-jiao.com
FRAGOM PR/412
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6GssYn_FRAGOM-PR-412.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/412 is a flame retardant polyolefine thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 13.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 190 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (90°C, 168 hr) | -8.0 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (90°C, 168 hr) | -10 | % | ISO 188 |
| Change in Tensile Stress (70°C, 4 hr, in SAE 20 Oil) | -20 | % | ISO 1817 |
| Change in Tensile Strain at Break (70°C, 4 hr, in SAE 20 Oil) | -10 | % | ISO 1817 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - Penetration 1(80°C) | 45 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Temperature Index (Burning) 2 | 270 | °C | NES 715 |
| Oxygen Index | 34 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 140 | °C | |
| Cylinder Zone 3 Temp. | 150 | °C | |
| Cylinder Zone 4 Temp. | 155 | °C | |
| Cylinder Zone 5 Temp. | 165 | °C | |
| Die Temperature | 170 | °C |
| Note Message | |
|---|---|
| 1 . | 4 hr |
| 2 . | 21% 02 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUNPRENE® FA70HH | Mitsubishi Chemical Performance Polymers, Inc. | PVC Elastomer | SUNPRENE® |
| Flontech® FT-915-RST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Gallonprene® GP520-4005 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| INLUBE PA610GF35TF5 | Infinity LTL Engineered Compounds | Nylon 610 | INLUBE |
| Polidan® T/A-LV | Solvay Specialty Polymers | XLPE | Polidan® |
