Order Products : sales@su-jiao.com
Halene P R103
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6GiRmZ_Halene-P-R103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
R103 is a Polypropylene Homopolymer, produced by the latest generation Spheripol Technology. This homopolymer is primarily suitable for Extrusion process. R103 combines exceptional processability with low Water Carry Over, excellent strength & Toughness and good Color Stability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.3 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1450 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 40 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 153 | °C | ASTM D1525 2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 220 - 280 | °C | |
| Cylinder Zone 2 Temp. | 220 - 280 | °C | |
| Cylinder Zone 3 Temp. | 220 - 280 | °C | |
| Cylinder Zone 4 Temp. | 220 - 280 | °C | |
| Cylinder Zone 5 Temp. | 220 - 280 | °C | |
| Die Temperature | 260 - 280 | °C |
| Extrusion instructions |
|---|
| Quench Temperature: 30 to 40°CStretching Temperature - Oven: 160°C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PBT 700/1 GF20 PTFE15 | ALBIS PLASTIC GmbH | PBT | ALCOM® PBT |
| Geon™ Vinyl Flexible 86479 Opaq | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| ELASTOSIL® M 4600 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| PEARLSTICK® 45-90/06 | Lubrizol Advanced Materials, Inc. | TPU-Capro | PEARLSTICK® |
| Pujie ACM-04 | Zhanhua Pujie Chemical Technology Co.,Ltd | CPE | Pujie |
