Order Products : sales@su-jiao.com
Borealis PE PC0780
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6GaXRn_Borealis-PE-PC0780.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PC0780 is a flame retardant crosslinking polyethylene compound for low voltage insulation. PC0780 contains a halogen-based, flame retardant additive package designed to reduce normal PE flame spread characteristics and achieve a VW-1 flame resistant rating on 14 AWG/45mils wires and larger. PC0780 is readily pigmented to a variety of colors using standard wire & cable concentrates designed for thermoplastic or crosslinked polyethylene. UV weather resistance is obtainable by the addition of a suitable carbon black or UV additive. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.22 | g/cm³ | ASTM D792 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 15.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 350 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | -10 | % | ASTM D573 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 550 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.60 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 2.6E-3 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 107 | °C | |
| Melt Temperature | 121 | °C |
| Extrusion instructions |
|---|
| Barrel 6: 116°CSteam Pressure: 17 bar |
| Note Message | |
|---|---|
| 1 . | Compound |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYLEM® 66 GTF 45 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| HiFill® PBT GF33 IM | Techmer Engineered Solutions | PBT | HiFill® |
| Domamid HT™ 7773R15H3 Bk-1 | Technical Polymers, LLC | Nylon 66 | Domamid HT™ |
| Kepamid® 1340GM8 | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| LEXAN™ EXL1434T resin | SABIC Innovative Plastics | PC | LEXAN™ |
