Order Products : sales@su-jiao.com
Alathon® L5845
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6EuqQL_Alathon-L5845.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON L5845 is a medium molecular weight high density homopolymer for use in blown film applications. Typical applications include paper replacement, coextrusions, slit tape, and laminations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.45 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| MD | 924 | MPa | ASTM D882 |
| TD | 1270 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 26.2 | MPa | ASTM D882 |
| TD : Yield | 26.9 | MPa | ASTM D882 |
| MD : Fracture | 54.5 | MPa | ASTM D882 |
| TD : Fracture | 31.7 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 750 | % | ASTM D882 |
| TD : Fracture | 850 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 22 | g | ASTM D1922 |
| TD | 1200 | g | ASTM D1922 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 - 210 | °C |
| Extrusion instructions |
|---|
| Typical Extrusion Conditions2.0 mil Blown FilmBlow-up Ratio: 2.5:1Die Gap: 60 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2467 | Covestro - Polycarbonates | PC | Makrolon® |
| Monprene® IN-12985 | Teknor Apex Company | TPE | Monprene® |
| Hostacom TRC 364N G82732 | LyondellBasell Industries | PP Copolymer | Hostacom |
| LUVOCOM® 20-0665/SCF | Lehmann & Voss & Co. | PPA | LUVOCOM® |
| ULTEM™ 1010 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
