Order Products : sales@su-jiao.com
WPP PP PPH4TF-2
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6DlRVG_WPP-PP-PPH4TF-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WPP PP PPH4TF-2 is a polypropylene homopolymer (PP Homopoly) product, which contains 20% talc filler. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. WPP PPH4TF-2 applications include industrial applications, furniture and automobile industries. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.3 - 1.7 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 93 | ASTM D785 | |
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 33.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 17 | % | ASTM D638 |
| Flexural Modulus - Tangent | 3190 | MPa | ASTM D790 |
| Flexural Strength | 48.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 27 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 31 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C, 3.18 mm) | 340 | J/m | ASTM D256 |
| Dart Drop Impact | ASTM D3029 | ||
| -30°C | 2.71 | J | ASTM D3029 |
| 23°C | 0.678 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 131 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 74.4 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 87.8 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 218 - 224 | °C | |
| Middle Temperature | 218 - 224 | °C | |
| Front Temperature | 221 - 227 | °C | |
| Nozzle Temperature | 227 - 238 | °C | |
| Mold Temperature | 15.6 - 48.9 | °C | |
| Injection Pressure | 4.14 - 7.58 | MPa | |
| Holding Pressure | 1.72 - 4.83 | MPa | |
| Back Pressure | 0.689 - 1.38 | MPa | |
| Clamp Tonnage | 3.4 - 5.5 | kN/cm² | |
| Cushion | 3.18 - 6.35 | mm |
| Injection instructions |
|---|
| Injection Speed: 1.5 to 2.5 in/sZone 4 Temperature: 440 to 450°FHot Runner Temperature: 440 to 470°FHydraulic Oil Temperature: 110 to 125°FShot Capacity vs. Barrel Capacity: 2.5 to 4Screw Decompression: 0.1 to 0.25 in |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoMid A200 FL | TechnoCompound GmbH | Nylon 66 | TechnoMid |
| Spartech Polycom SC7-70915U | Spartech Polycom | PC | Spartech |
| Adell Polyamide BJ-33 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Delta PPR-1CG40 | Delta Polymers | PP Homopolymer | Delta |
| Pearlbond™ 520 | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlbond™ |
