Order Products : sales@su-jiao.com
Prime PE HMWPE 1000
| Category: | HMWPE , High Molecular Weight Polyethylene |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6CkKoO_Prime-PE-HMWPE-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prime HMWPE 1000 is a high molecular weight polyethylene with excellent balance of stress crack resistance, stiffness and melt strength. It also has good rigidity and impact strength even at low temperatures. These properties make this product ideal for thermoforming large parts. Applications: Some ideal applications for Prime HMWPE 1000 include cattle feeders, pallets, truck bed liners, portable toilets, totes and any other parts that require the attributes mentioned above. Processing: This is a crystalline material, therefore, good forming practices should be used when working with this material. Forming temperature is 310-360°F. Mold temperature should be 160-200°F. Aluminum, grit blasted molds are preferred and should be designed with a moat if possible. Mold shrink is .016 to .028 in./in. Finishing: Prime HMWPE 1000 can be fabricated by using techniques such as drilling, routing, punching, sawing and cutting with a die, laser or water jet. Mechanical screws and other type of fasteners can be used. Expansion/Contraction must be considered when working with Prime HMWPE 1000. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime HMWPE 1000 can be color matched to meet your specifications. Gauges are available from .015 up to .425 and in widths up to 169". Textures available include the following; Levant II, HC, Calf Grain, RM, and Seville. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.947 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 600 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 1170 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -90.6 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (> 1.52 mm) | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Forming Temperature | 154 to 182 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 71 to 93 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMAPET® N1 | Indorama Ventures PCL | PET | RAMAPET® |
| WEVO-CHEMIE Polyurethanes PD 4/385 | WEVO-CHEMIE GmbH | PUR, Unspecified | WEVO-CHEMIE Polyurethanes |
| Generic Polyester Alloy - Glass\Inorganic | Generic | Polyester Alloy | Generic |
| GPP™ 1020 | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| LNP™ LUBRICOMP™ WL004 compound | SABIC Innovative Plastics | PBT | LNP™ LUBRICOMP™ |
