Order Products : sales@su-jiao.com

REPETE MAX

Category:	PET , Polyethylene Terephthalate
Manufacturer:	M&G Gruppo Mossi & Ghisolfi
Trademark:	REPETE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	67n5Rp_REPETE-MAX.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
REPETE MAX Polyester Resin is a TPA-based polyethylene terephthalate copolymer resin targeted to have an average of 10 percent post-consumer recycle (PCR) content. It is a high molecular weight polymer with a 0.84 intrinsic viscosity (IV). REPETE MAX Polyester Resin is designed with enhanced ability to absorb energy from the near infrared lamps used in most high-speed blow molding machines. The enhanced energy absorption can result in improved temperature control in the process, which in turn can lead to improved material distribution and bottle properties. This improvement may also lead to improved machine output or reduced energy consumption. REPETE MAX Polyester Resin is the latest generation heat up graded designed to provide highly desirable container properties. These include high clarity and sparkle, high strength and toughness, and good barrier properties.

Message

REPETE MAX Polyester Resin is a TPA-based polyethylene terephthalate copolymer resin targeted to have an average of 10 percent post-consumer recycle (PCR) content. It is a high molecular weight polymer with a 0.84 intrinsic viscosity (IV).
REPETE MAX Polyester Resin is designed with enhanced ability to absorb energy from the near infrared lamps used in most high-speed blow molding machines. The enhanced energy absorption can result in improved temperature control in the process, which in turn can lead to improved material distribution and bottle properties. This improvement may also lead to improved machine output or reduced energy consumption.
REPETE MAX Polyester Resin is the latest generation heat up graded designed to provide highly desirable container properties. These include high clarity and sparkle, high strength and toughness, and good barrier properties.

General Information
Features	Ultra high toughness High molecular weight High strength Copolymer Definition, high Barrier resin
Uses	Bottle Container
Forms	Particle
Processing Method	Blow molding

Thermal	Nominal Value	Unit
Melting Temperature	248	°C

Additional Information
Post-consumer recycle content, Mass balance, +/- 2: 10%Intrinsic viscosity (I.V.), SMS 2867, +/- 0.02: 0.84 dl/gAcetaldehyde content, SMS 2791: 1.6 ppm Max.Colour (L* value), SMS 2789: 70 Min.Colour (b* value), SMS 2789: 1 Max.Melting point, SMS 2844: 248°CForeign particles, Visual Detection: None

Resin Grade	Manufacturer	Category	Trademark
Polymer-E EV103	Asia Polymer Corporation (APC)	EVA	Polymer-E
SABIC® HDPE PCG5421	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® HDPE
ALCOM® TCD PA66 5040 14016	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® TCD PA66
Hanwha Total PE E153A	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	EVA	Hanwha Total PE
Sylvin 8479-85 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin