Order Products : sales@su-jiao.com

DOWLEX™ 2355

Category:	EPE , Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOWLEX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	66Fw4C_DOWLEX2355.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

DOWLEX 2355 Polyethylene Resin is an ethylene-octene copolymer, produced in the proprietary solution process of The Dow Chemical Company. It has a unique molecular structure with a controlled side chain distribution, which provides excellent stress crack resistance properties combined with very good Long Term Hydrostatic Strength.

Processability: Typical extrusion temperatures for processing of DOWLEX 2355 Polyethylene Resin range from 190 to 230° C. The use of a reverse temperature profile may be beneficial on certain types of processing equipment. For further information, see our Extrusion Guideline.

Applications:
Pipes for hot and cold water systems, e.g.:

floor heating

wall heating/cooling

ceiling cooling

radiator connections

warm / cold drinking water distribution

heat recovery systems

solar panels

Complies with:

EU, No 10/2011

U.S. FDA 21 CFR 175.105(c)(5)

U.S. FDA 21 CFR 177.1520(c)3.2a (with Restrictions)

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 175.105(c) (5) FDA 21 CFR 177.1520(c) 3.2a (With Restrictions) Europe 10/1/2011 12:00:00 AM
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.931	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.70	g/10 min	ASTM D1238
190°C/5.0 kg	2.3	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (50°C, 10% Antarox)	> 8760	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (2.00 mm, Compression Molded)	399	MPa	ISO 527-2
Tensile Stress			ISO 527-2
Yield, 2.00mm, molded	14.0	MPa	ISO 527-2
Fracture, 2.00mm, molded	36.0	MPa	ISO 527-2
Tensile Strain			ISO 527-2
Yield, 2.00mm, molded	6.0	%	ISO 527-2
Fracture, 2.00mm, molded	> 800	%	ISO 527-2
Flexural Modulus (2.00 mm, Compression Molded)	429	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	119	°C	ASTM D1525
CLTE - Flow (20 to 70°C)	2.7E-4	cm/cm/°C	DIN 53752
Thermal Conductivity (60°C)	0.40	W/m/K	DIN 52612

Cured Properties	Nominal Value		Test Method
Shore Hardness ¹(Shore D, 2.00 mm)	59		ISO 868

Note Message
1 .	Compression Molded

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer FEA-251U	Shin-Etsu Silicones of America	Fluoro Si	Shin-Etsu Elastomer
SOLPLAST TH 9000A	UTEKSOL d.o.o.	SEBS	SOLPLAST TH
VITAMIDE® BB16BK6671	Jackdaw Polymers	Nylon 6	VITAMIDE®
VICTREX® PEEK 150FW30	Victrex plc	PEEK	VICTREX® PEEK
Ultramid® 1403-2 BK ND3007	BASF Corporation	Nylon 66	Ultramid®