Order Products : sales@su-jiao.com
Andur 9-APF-LM/Curene3005/St105
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 66ADIh_Andur-9-APF-LM-Curene3005-St105.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| All properties based on Andur® 9-APF-LM cured with Curene® 3005 |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 15.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1000 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.45 | MPa | ASTM D412 |
| 300% strain | 4.38 | MPa | ASTM D412 |
| Tear Strength | |||
| -- 1 | 47.5 | kN/m | ASTM D624 |
| Cracking | 36 | kN/m | ASTM D470 |
| Compression Set | 50 | % | ASTM D395 |
| Additional Information |
|---|
| Rebound, %: 38Stoichiometry: 105% |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2101 TFE 15 | RTP Company | PEI | RTP |
| TOTAL Polyethylene HDPE BM 962 | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| ADDINYL B2 G30 | ADDIPLAST | Nylon 6 | ADDINYL |
| OmniCarb™ PC/ABS 1024 CBFR0 | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
| Plenco 07080 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
