Order Products : sales@su-jiao.com
Wanthane® WHT-1495RV
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5v4tWK_Wanthane-WHT-1495RV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WHT-1495RV is polyester-based TPU for injection molding and extrusion applications, supplied in form of transparent, translucent, colorless or slightly yellowish pellets with Excellent strength resilience and transparence Applications: Air Cushion, transparent shoe sole, etc |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 13.0 | MPa | |
| 300% Strain | 30.0 | MPa | |
| Tensile Strength | 40.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Tear Strength | 150 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -25.0 | °C | ASTM D3417 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 195 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 210 | °C | |
| Injection Pressure | 70.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 195 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Die Temperature | 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 25 FRG 5 TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| SLOVALEN® PH 69 GF 30/1M | Plastcom | PP, Unspecified | SLOVALEN® |
| VAMPAMID 6 3028 V2 MF | Vamp Tech | Nylon 6 | VAMPAMID |
| INEOS PP H20H-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| ICORENE® 1613 BK85 | ICO Polymers EMEA, A Division of A. Schulman | LMDPE | ICORENE® |
