Next PMMA AX-01YW.(MH-3121)

Category: Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer: Next Polymers Ltd.
Trademark: Next PMMA
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 5uYqDt_Next-PMMA-AX-01YW-MH-3121-.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Description
PMMA Transparent Yellow compound

Product Applications
Lighting Fixture, Lenses, Automotive instrument panel & Industrial Application

Benefits
High Transmittance & High heat resistance
General Information
Features
  • High Heat Resistance
Uses
  • Automotive Instrument Panel
  • Industrial Applications
  • Lenses
  • Lighting Fixtures
Agency Ratings
  • EC 1907/2006 (REACH)
RoHS Compliance
  • RoHS Compliant
Appearance
  • Clear/Transparent
  • Yellow
Processing Method
  • Injection Molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.18g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)4.0g/10 minASTM D1238
Molding Shrinkage ASTM D955
    Flow 0.30%
    Across Flow 0.30%
Water Absorption (23°C, 24 hr)0.30%ASTM D570
HardnessNominal ValueUnitTest Method
Rockwell Hardness (M-Scale)100ASTM D785
MechanicalNominal ValueUnitTest Method
Tensile Modulus 3400MPaASTM D638
Tensile Strength 70.0MPaASTM D638
Tensile Elongation (Break)10%ASTM D638
Flexural Modulus 3200MPaASTM D790
Flexural Strength 120MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (23°C)25J/mASTM D256
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)102°CASTM D648
Vicat Softening Temperature 109°CASTM D1525
CLTE - Flow 7.0E-5cm/cm/°CASTM D696
ElectricalNominal ValueUnitTest Method
Surface Resistivity 1.0E+16ohmsIEC 60093
Volume Resistivity 1.0E+15ohms·cmIEC 60093
Electric Strength 20kV/mmIEC 60243-1
Dielectric Constant (60 Hz)3.10ASTM D150
OpticalNominal ValueUnitTest Method
Refractive Index 1.490ASTM D542
Transmittance 91.0%ASTM D1003
InjectionNominal ValueUnit
Drying Temperature - Hot Air Dryer 90.0°C
Drying Time 4.0 to 6.0hr
Rear Temperature 240 to 250°C
Middle Temperature 250 to 260°C
Front Temperature 260 to 270°C
Mold Temperature 60.0 to 85.0°C
Resin Grade Manufacturer Category Trademark
Maxxam™ SY 89-22-7 PolyOne Corporation PP, Unspecified Maxxam™
Shandong PA/PP PA66/PP Shandong Dongchen Engineering Plastics Co., Ltd. Nylon 66+PP Shandong PA/PP
ABSCOM® S180 Polymer Compounders Limited ABS ABSCOM®
NYLOY® NG-0830B Nytex Composites Co., Ltd. Nylon 6 NYLOY®
Adiprene® LF 800A Chemtura PUR-Ether/TDI Adiprene®