Order Products : sales@su-jiao.com

PrimoPrene 90A-1000

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	KMI Group Inc.
Trademark:	PrimoPrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5k3rPw_PrimoPrene-90A-1000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Attributes:

PrimoPrene TPV is a thermoplastic elastomer containing fully vulcanized EPDM rubber.

It is ideal solution for applications requiring long term sealing performance even at elevated temperatures up to 135°C (275F).

Soft-touch feel for grips and handles used in automotive and consumer goods.

Can be processed using conventional thermoplastic processing equipment.

There is no need for costly and energy guzzlind down stream equipment for curing.

Suitable for injection molding, blow molding, profile and sheet extrusion applications.

PrimoPrene TPV is supplied in weatherable (UV stabilized) black.

Applications:
PrimoPrene is a cost effective solution for replacing Santoprene rubber, styrenic-based TPEs, and thermoset rubbers such as EPDM, and Polychloroprene. It is an excellent choice for applications requiring flexibility in the following markets: automotive parts, appliance, business machines, construction, consumer products, and electronics.

General Information
Additive	Rubber 2 UV Stabilizer
Features	Good Colorability Good Flexibility Good Heat Seal Good UV Resistance Soft
Uses	Appliances Automotive Applications Business Equipment Construction Applications Consumer Applications Electrical/Electronic Applications Flexible Grips Handles
Appearance	Black
Processing Method	Blow Molding Extrusion Injection Molding Profile Extrusion Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.960	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ¹(230°C/10.0 kg)	10 to 18	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A, 5 sec	90
Shore A, 15 sec	87

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ²(100% Strain, 23°C)	6.30	MPa	ASTM D412
Tensile Strength ³(Yield, 23°C)	16.9	MPa	ASTM D412
Tensile Elongation ⁴(Break, 23°C)	520	%	ASTM D412
Tear Strength ⁵(23°C)	65.0	kN/m	ASTM D624
Compression Set			ASTM D395
70°C, 22 hr	41	%
125°C, 70 hr	72	%

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-50.0	°C	ASTM D746
Melting Temperature	159	°C

Additional Information	Nominal Value		Test Method
Ozone Resistance ⁶	Excellent		ASTM D1149

Injection	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr

Extrusion	Nominal Value	Unit
Drying Temperature	65.6	°C
Drying Time	3.0	hr

Note Message
1 .	Procedure A
2 .	500 mm/min
3 .	500 mm/min
4 .	500 mm/min
5 .	Die C, 500 mm/min
6 .	500 hr, 100 pphm O3 conc.

Resin Grade	Manufacturer	Category	Trademark
RTP 300 HF UV	RTP Company	PC	RTP
StarTwist™ 315XT (transparent)	Innovia Films Ltd.	CA	StarTwist™
ULTEM™ 2300 resin	SABIC Innovative Plastics	PEI	ULTEM™
DOW™ LDPE 352E	The Dow Chemical Company	LDPE	DOW™ LDPE
KumhoSunny AES HW601HI	Shanghai KumhoSunny Plastics Co., Ltd.	AES	KumhoSunny AES