Order Products : sales@su-jiao.com
Glastic® FHT
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5XhrPg_Glastic-FHT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic® Grade FHT (Flexible High Temperature) Laminate provides numerous high-performance features and benefits, such as high flexibility and excellent dielectric strength at elevated temperatures. It also exhibits the highest UL temperature index in the industry for a flexible glass-reinforced polyester in 1/32 inch and 1/16 inch thicknesses: 190°C and 200°C respectively (for both electrical and mechanical properties). Part Number: 1800 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.1 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (1.60 mm) | 72.4 | MPa | ASTM D638 |
| Compressive Strength (1.60 mm) | 96.5 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.60 mm) | 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| RTI Elec | UL 746 | ||
| 0.711 mm | 190 | °C | UL 746 |
| 1.47 mm | 200 | °C | UL 746 |
| RTI | UL 746 | ||
| 0.711 mm | 190 | °C | UL 746 |
| 1.47 mm | 200 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | ASTM D149 | ||
| 1.60 mm, Perpendicular S/T in Air | 18 | kV/mm | ASTM D149 |
| 1.60 mm, Perpendicular S/T in Oil | 22 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1.60 mm, 60 Hz | 6.40 | ASTM D150 | |
| 1.60 mm, 1 MHz | 4.20 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1.60 mm, 60 Hz | 0.070 | ASTM D150 | |
| 1.60 mm, 1 MHz | 0.033 | ASTM D150 | |
| Arc Resistance (1.60 mm) | 139 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (1.60 mm) | 500 | V | UL 746 |
| High Amp Arc Ignition (HAI) (1.60 mm) | 200 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) (1.60 mm) | 0.00 | mm/min | UL 746 |
| Hot-wire Ignition (HWI) | UL 746 | ||
| 0.711 mm | 49 | sec | UL 746 |
| 1.47 mm | 100 | sec | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Oxygen Index (1.60 mm) | 22 | % | ASTM D2863 |
| Additional Information |
|---|
| Dielectric Strength, Parallel S/S in Oil, 0.063 in: 60 kV |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mar-Bal MB3000-15 | Mar-Bal, Inc. | Polyester, TP | Mar-Bal |
| TAROMID A 280 R2 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| ASTALON™ S1000R | Marplex Australia Pty. Ltd. | PC | ASTALON™ |
| Generic EEA | Generic | EEA | Generic |
| Eleme NGH200IG | Eleme Petrochemical Company Ltd | HDPE | Eleme |
