Order Products : sales@su-jiao.com
Eleme HFG00356
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Eleme Petrochemical Company Ltd |
| Trademark: | Eleme |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5Wzu1O_Eleme-HFG00356.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Carry bag, grocery bags trash bags, liners, co-extrusion, etc. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 25 µm | 26.0 | MPa | |
| TD : Break, 25 µm | 26.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 500 | % | |
| TD : Break, 25 µm | 800 | % | |
| Flexural Modulus | ASTM D790 | ||
| MD : 25 µm | 800 | MPa | |
| TD : 25 µm | 1000 | MPa | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 0.70 | g | |
| TD : 25 µm | 25 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RODRUN LC-5040G | UNITIKA Plastics Division | LCP | RODRUN |
| SLOVAMID® 6 GF 15 HI | Plastcom | Nylon 6 | SLOVAMID® 6 |
| ESENTTIA 03H82 | Polipropileno del Caribe S.A. | PP Homopolymer | ESENTTIA |
| Plenco 05350 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| SCHULARENE™ N3103 | A. Schulman Europe | PLA | SCHULARENE™ |
