Europrene® N 1945 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5Vql30_Europrene-N-1945-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 1945 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 1945 GRN is the grade with the best low temperature properties in Europrene N family. As all GRN grades it shows higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be further improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Injected or extruded technical goods requiring oil resistance and very good low temperature flexibility. Food contact applications.

Message

Europrene® N 1945 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 1945 GRN is the grade with the best low temperature properties in Europrene N family. As all GRN grades it shows higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be further improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Injected or extruded technical goods requiring oil resistance and very good low temperature flexibility. Food contact applications.

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Low Temperature Flexibility Low Temperature Resistant Oil Resistant
Uses	Non-specific Food Applications
Appearance	Yellow
Forms	Bale
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	45	MU	ASTM D1646
Acrylonitrile Content	19.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Nipol® LX119	Zeon Corporation	Latex	Nipol®
Bynel® 50E725	DuPont Packaging & Industrial Polymers	PP, Unspecified	Bynel®
DuraStar™ MN630	Eastman Chemical Company	Polyester, TP	DuraStar™
OXNILON 66 30CF 15PTFE	Oxford Polymers	Nylon 66	OXNILON 66
Sylvin 9710-80FUV Red 6228	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin