Order Products : sales@su-jiao.com

KRATON® G1651 E

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5VYAnA_KRATON-G1651-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G1651 E is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is supplied from Europe in two physical forms identified below. Kraton G1651 EU - supplied as undusted'fluffy crumb Kraton G1651 ES - supplied as fluffy crumb dusted with amorphous silica Kraton G1651 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

Message

Kraton G1651 E is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is supplied from Europe in two physical forms identified below.

Kraton G1651 EU - supplied as undusted'fluffy crumb

Kraton G1651 ES - supplied as fluffy crumb dusted with amorphous silica

Kraton G1651 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

General Information
Additive	Antioxidant (300 ppm)
Features	Block Copolymer Good Thermal Stability Good Weather Resistance
Agency Ratings	FAA 14 CFR Part 25 App. F
Appearance	Clear/Transparent
Forms	Crumb

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ISO 2781
Solution Viscosity ¹	1500	mPa·s	Internal Method
Bound Styrene	30.0 to 33.0	%	Internal Method
Antioxidant Additive	> 0.030	%	Internal Method
Ash Content - Product Form "ES"	0.30 to 0.50	%	ISO 247
Extractables	< 1.6	%	Internal Method
Volatile Matter	< 0.50	%	Internal Method

Note Message
1 .	Measured on 10% m/m solution in toluene at 25°C using a Brookfield viscometer LVT model

Resin Grade	Manufacturer	Category	Trademark
AIE PP 80T4F	Asia International Enterprise (Hong Kong) Limited	PP, Unspecified	AIE PP
DuPure® SU 76 A	Ducor Petrochemicals BV	PP Impact Copolymer	DuPure®
GELOY™ HRA150 resin	SABIC Innovative Plastics Europe	ASA	GELOY™
Hifax SP 179	LyondellBasell Industries	PP, Unspecified	Hifax
Styropek® BFL 397S	Styropek S.A. de C.V.	PS (EPS)	Styropek®