Order Products : sales@su-jiao.com
Miramid® SK1515CW
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5TgcbK_Miramid-SK1515CW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid® SK1515CW is a Polyamide 66 (Nylon 66) material filled with filler. It is available in Europe for injection molding. Important attributes of Miramid® SK1515CW are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1370 | -- | kg/m³ | ISO 1183 1 |
| Viscosity number | 145 | -- | cm³/g | ISO 307, 1157, 1628 2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 7000 | -- | MPa | ISO 527-2 3 |
| Tensile Stress (Break) | 130 | -- | MPa | ISO 527-2 4 |
| Tensile Strain (Break) | 3.0 | -- | % | ISO 527-2 5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 6 | |||
| -30°C | 3.00 | -- | kJ/m² | |
| 23°C | 3.50 | -- | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 7 | |||
| -30°C | 40.0 | -- | kJ/m² | |
| 23°C | 40.0 | -- | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 8 | |||
| 0.45 MPa | 250 | -- | °C | |
| 1.8 MPa | 250 | -- | °C | |
| Melting Temperature 9 | 260 | -- | °C | ISO 11357-3 10 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume resistivity | 1.0E+13 | -- | ohms·m | IEC 60093 11 |
| Relative Permittivity (1 MHz) | 3.50 | -- | IEC 60250 12 | |
| Dissipation Factor (1 MHz) | 0.015 | -- | IEC 60250 13 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Behav. at 1.6mm nom. thickn. (1.60 mm) | HB | -- | ISO 1210 14 |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | 10 °C/min |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2285 | RTP Company | PEEK | RTP |
| SEETEC LLDPE UF313 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| APICAL 120AF616 | Kaneka Corporation | PI, TS | APICAL |
| Petrothene® NA205000X01 | LyondellBasell Industries | LDPE | Petrothene® |
| SQUARE® LSR8610-10A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
