Order Products : sales@su-jiao.com
ISPLEN® PP 010 X6E
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5SSdUO_ISPLEN-PP-010-X6E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISPLEN® PP-010 X6E is a homopolymer with a high molecular weight that contains a high thermal stability formulation. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes ADDITIVATION ISPLEN® PP-010 X6E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability and increase the hot-water extraction resistance. Other additives may be included by the processor. Formulation allows polymer stability during the normal conditions of processing and use. COLOURING ISPLEN grades are supplied in natural colour but they can be easily coloured with pigments steady at processing temperatures, using dry -colouring or masterbatch techniques. FOODSTUFF REGULATIONS ISPLEN® PP-010 X6E are approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our local representative or the Technical Service. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/5.0 kg | 0.55 | g/10 min | |
| 230°C/2.16 kg | 0.28 | g/10 min | |
| 230°C/5.0 kg | 1.0 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 84 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 34.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 14 | % | ISO 527-2 |
| Flexural Modulus | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 8.5 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 92.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 150 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 to 200 | °C | |
| Cylinder Zone 2 Temp. | 190 to 205 | °C | |
| Cylinder Zone 3 Temp. | 195 to 210 | °C | |
| Cylinder Zone 4 Temp. | 195 to 215 | °C | |
| Cylinder Zone 5 Temp. | 200 to 220 | °C | |
| Melt Temperature | 205 to 225 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RFL4530 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| Scolefin 52 T 10-0 | Ravago Group | PP Homopolymer | Scolefin |
| Sarlink® TPV 24580 | Teknor Apex Company | TPV | Sarlink® TPV |
| Sylvin 2943-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Celcon® M90SW | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
