Order Products : sales@su-jiao.com
SureSpec LLSC6-010
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5RNgsg_SureSpec-LLSC6-010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLSC6-010 is an Ethylene-Hexene Copolymer certified prime g dorf tear strength. LLSC6-010 contains no slip and no antiblock. Maximum recommended film drawdown is 0.3 mil. LLSC6-010 complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 Slip/ High Antiblock F = Full Additives |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 25 µm | 193 | MPa | |
| 1% Secant, TD : 25 µm | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 11.0 | MPa | |
| TD : Yield, 25 µm | 12.0 | MPa | |
| MD : Break, 25 µm | 55.0 | MPa | |
| TD : Break, 25 µm | 40.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 650 | % | |
| TD : Break, 25 µm | 780 | % | |
| Dart Drop Impact 1(25 µm) | 480 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 430 | g | |
| TD : 25 µm | 750 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 55 | ASTM D2457 | |
| Haze (25.0 µm, Blown Film) | 9.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPRAN® PA1350 | SAMBARK | Nylon, Unspecified | SUPRAN® |
| Ad-Tech Epoxy EL-318-1 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Fortron® 6165A6 | Celanese Corporation | PPS | Fortron® |
| Lucky Enpla LAY8008L | Lucky Enpla Co LTD | ASA+PC | Lucky Enpla |
| Complet® LCF10-LGF30-PA66 | PlastiComp, Inc. | Nylon 66 | Complet® |
