Order Products : sales@su-jiao.com
apinat® DP2267 P
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5Qksc3_apinat-DP2267-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP2267 P is a biodegradable polymer (Biodeg Polymers) product,. It can be processed by extrusion or injection molding and is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 - 1.70 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 - 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 30.0 - 43.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 15 - 450 | % | ASTM D638 |
| Flexural Modulus | 590 - 1500 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 72.0 - 190 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 - 170 | °C | |
| Middle Temperature | 170 - 180 | °C | |
| Front Temperature | 185 - 195 | °C | |
| Nozzle Temperature | 195 - 210 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 - 170 | °C | |
| Cylinder Zone 2 Temp. | 170 - 180 | °C | |
| Cylinder Zone 3 Temp. | 180 - 190 | °C | |
| Cylinder Zone 4 Temp. | 190 - 200 | °C | |
| Cylinder Zone 5 Temp. | 185 - 195 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toraypef® 10010 AP67 | Toray Resin Company | Polyolefin, Unspecified | Toraypef® |
| Etinox® EP-9017 | Ercros, S.A. | PVC, Semi-Rigid | Etinox® |
| Paracril OZO® 3996 | INSA | PVC+NBR | Paracril OZO® |
| Formolene® 3310Z | Formosa Plastics Corporation, U.S.A. | PP Random Copolymer | Formolene® |
| Sylvin 7833-60 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
