Order Products : sales@su-jiao.com
CABELEC® CA3817
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5P5AcV_CABELEC-CA3817.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC® 3817 is an electrically conductive compound based on conductive carbon black and a modified linear low density polyethylene resin. Its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. CABELEC 3817 is recommended for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary. Examples of use are in handling of explosive powders, pigments and electronic components. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.04 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) 2 | ISO 1133 | ||
| 190°C/10.0 kg | 6.0 | g/10 min | |
| 190°C/5.0 kg | 2.0 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 3(Compression Molded) | 284 | MPa | ISO 178 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 4 | ISO 527-3/500 | ||
| MD : Yield, 100 µm | 11.8 | MPa | |
| TD : Yield, 100 µm | 11.5 | MPa | |
| MD : 100 µm | 25.1 | MPa | |
| TD : 100 µm | 22.4 | MPa | |
| Tensile Elongation 5 | ISO 527-3/500 | ||
| MD : Break, 100 µm | 1100 | % | |
| TD : Break, 100 µm | 940 | % | |
| Trouser Tear Resistance | ASTM D1938 | ||
| MD : 50 µm | 106 | N/mm | |
| TD : 50 µm | 104 | N/mm |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 6(0.100 mm) | 1.0E+4 | ohms | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 200 to 230 | °C | |
| Cylinder Zone 2 Temp. | 200 to 230 | °C | |
| Cylinder Zone 3 Temp. | 200 to 230 | °C | |
| Cylinder Zone 4 Temp. | 200 to 230 | °C | |
| Cylinder Zone 5 Temp. | 200 to 230 | °C | |
| Die Temperature | 200 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | CTM E023 |
| 2 . | CTM E005 |
| 3 . | CTM E040A |
| 4 . | CTM E041 |
| 5 . | CTM E041 |
| 6 . | CTM E042B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CERTENE™ PBM-5035 | Muehlstein | PP Impact Copolymer | CERTENE™ |
| Eltex® B4922/90N3000 | INEOS Olefins & Polymers Europe | HDPE | Eltex® |
| HiFill® PA4/6 GF30 HS NAT | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Mediprene® 502684M | ELASTO | TPE | Mediprene® |
| Sylvin 4200-88 Yellow 4192 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
