Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 795-01 Natural
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5NS7bW_ASI-POLYETHYLENE-CP-795-01-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 795-01 natural is an extruded, blow molding, and injection molding grade of low density polyethylene having good processability and hear sealability. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.919 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 11.4 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 110 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 117 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 91.7 | °C | ASTM D1525 3 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | Rate A (50°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLARENE G126 | Dongbu Hannong Chemical | PS (GPPS) | SOLARENE |
| NEXT REPROCESSED PPH T20-300R | NEXT Specialty Resins, Inc. | PP Homopolymer | NEXT REPROCESSED |
| AGILITY™ 2001 | The Dow Chemical Company | LDPE | AGILITY™ |
| Plenco 07579 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| LUVOCOM® 1301-VAP 10 | LEHVOSS Group | PPS | LUVOCOM® |
