Order Products : sales@su-jiao.com
RTP 6035-55A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5NFPPL_RTP-6035-55A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Clear |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 to 4.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 1.38 | MPa | ASTM D412 |
| Tensile Strength 2(Yield, 3.20 mm) | 9.65 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 720 | % | ASTM D412 |
| Tear Strength 4 | 38.5 | kN/m | ASTM D624 |
| Compression Set 5(23°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 51.7 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Dew Point | < -17.8 | °C | |
| Processing (Melt) Temp | 182 to 232 | °C | |
| Mold Temperature | 15.6 to 65.6 | °C |
| Note Message | |
|---|---|
| 1 . | Die C, 510 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Die C |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILAMID® A3 J20 | Nilit Plastics | Nylon 66 | NILAMID® |
| Fiberfil® PP-60/TC/20/FD | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| Kynar® 340 | Arkema | PVDF | Kynar® |
| Sylvin 8240-98FU Grey 9570 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| 3M™ Dyneon™ Fluoroelastomer FE 5624Q | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
