Order Products : sales@su-jiao.com
Epoxies, Ect. 50-3182 NC (Cat. 190)
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5MYeE0_Epoxies-Ect-50-3182-NC-Cat-190-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
50-3182 NC is a highly filled epoxy system with excellent physical, electrical, and thermal properties. 50-3182 NC offers very high thermal conductivity, excellent electrical insulation, and low thermal expansion. This unique combination of properties makes this system ideal for applications where electrical insulation and mechanical protection must be maintained while transferring heat. Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.10 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 93.1 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 19 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 3.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 1.7 | W/m/K | |
| Heat Distortion | 175 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -55.0 to 205 | °C |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 90000 | cP |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 3.0 to 4.0 | ||
| Density 1(25°C) | 2.29 | g/cm³ | |
| Curing Time (66°C) | 2.0 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption 2 | 0.11 | % | |
| Shore Hardness (Shore D) | 95 | ||
| Tensile Modulus | 10300 | MPa | |
| Tensile Strength | 58.6 | MPa | |
| Compression Strength | 117 | MPa | |
| Electric Strength | 22 | kV/mm | |
| Relative Permittivity (60 Hz) | 6.40 | ||
| Volume Resistivity | 4.9E+16 | ohms·cm | |
| Dissipation Factor (60 Hz) | 0.018 |
| Note Message | |
|---|---|
| 1 . | Mixed |
| 2 . | After 7 days |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-1013 | QTR, Inc. | PC | QR Resin |
| Shandong PC/ABS PC/ABS-2 | Shandong Dongchen Engineering Plastics Co., Ltd. | PC+ABS | Shandong PC/ABS |
| Terluran® EGP-7 | INEOS Styrolution Group GmbH | ABS | Terluran® |
| DENILUB PPA NEAT RESIN | Vamp Tech | PPA | DENILUB |
| apilon 52bio® DB 72 | API SpA | TPU-Polyester | apilon 52bio® |
