Order Products : sales@su-jiao.com
Moldex® QS262D/QCM240
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Mitsubishi Chemical Corporation |
| Trademark: | Moldex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5LowYR_Moldex-QS262D-QCM240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moldex® QS262D/QCM240 is a Polyolefin material. It is available in Asia Pacific. Primary attribute of Moldex® QS262D/QCM240: Crosslinkable. Typical application of Moldex® QS262D/QCM240: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (120°C/5.0 kg) | 0.90 | g/10 min | ISO 1133 |
| Gel Content 1(120°C) | 71 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 54 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 16.0 | MPa | |
| Yield, 95°C | 6.30 | MPa | |
| Break, 23°C | 27.0 | MPa | |
| Break, 95°C | 13.5 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, 23°C | 550 | % | |
| Break, 95°C | 800 | % |
| Note Message | |
|---|---|
| 1 . | In Xylene, 20 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 303 TFE 15 SI 2 | RTP Company | PC | RTP |
| Smooth-Cast® ONYX® Slow | Smooth-On, Inc | PUR, Unspecified | Smooth-Cast® |
| APEX® RM 8001R-NT | Teknor Apex Company | PVC, Rigid | APEX® |
| LEXAN™ FXD171R resin | SABIC Innovative Plastics | PC | LEXAN™ |
| XANTAR® C CP 200 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
