Order Products : sales@su-jiao.com
Elastollan® 1298 A U
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5GV2vc_Elastollan-1298-A-U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Highly transparent thermoplastic Polyether Polyurethane Elastomer with good hydrolysis resistance, low temperature flexibility and resistance to micro-organismus Typical applications Ski boot shells, ski components, Films. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 3 sec) | 50 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 90.0 | MPa | ISO 527-2 |
| Abrasion Loss | 25.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 20% Strain | 9.00 | MPa | |
| 100% Strain | 16.0 | MPa | |
| 300% Strain | 28.0 | MPa | |
| Tensile Stress | DIN 53504 | ||
| Yield 1 | 50.0 | MPa | |
| Yield | 60.0 | MPa | |
| Tensile Elongation | DIN 53504 | ||
| Break 2 | 550 | % | |
| Break | 460 | % | |
| Tear Strength 3 | 130 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 28 | % | |
| 70°C, 24 hr | 45 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 170 | kJ/m² | |
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 215 to 240 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | after storage in water at 80°C for 42 days |
| 2 . | after storage in water at 80°C for 42 days |
| 3 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 92 T 30 | Plastcom | PP, Unspecified | SLOVALEN® |
| Alathon® L5485 | LyondellBasell Industries | HDPE, MMW | Alathon® |
| Iupital® ET-25 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
| PETILEN H2-8 | PETKIM Petrokimya Holding A.S. | LDPE | PETILEN |
| Plaslube® POM CO GF10 SL2 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
