Order Products : sales@su-jiao.com
ADMER™ GT7E
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5GP8GY_ADMER-GT7E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® GT7E is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks (PFT) composed of PE, PA and EVOH. It offers advanced adhesion durability, fuel resistance and processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 15.0 | MPa | |
| Break | 29.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 108 | °C | ASTM D1525 |
| Peak Melting Temperature | 127 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEQUEL® 1780 | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| Ultra Low Outgassing™ SCV-2596 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Clariant Nylon 6/6 PA-111G33 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Elastollan® 1185A10V | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyether | Elastollan® |
| LNP™ THERMOCOMP™ AF004XXY compound | SABIC Innovative Plastics | ABS | LNP™ THERMOCOMP™ |
