TAROMID A 280 G6 MB1 Datasheet,Nylon 66,Taro Plast S.p.A.-SHANGHAI SUSHENG

Message
TAROMID A 280 G6 MB1 is a polyamide 66 (nylon 66) product containing a 30% glass fiber reinforced material. It can be processed by injection molding and is available in Europe. Features include: flame retardant/rated flame heat stabilizer mold release agent excellent release agent Medium viscosity

General Information
Filler / Reinforcement	Glass fiber reinforced material, 30% filler by weight
Additive	heat stabilizer demoulding
Features	Low friction coefficient Thermal Stability Good demoulding performance Medium viscosity
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (280°C/1.0 kg)	8.0	g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage			ASTM D955
Flow	0.40 - 0.60	%	ASTM D955
Transverse flow	0.90 - 1.1	%	ASTM D955
Water Absorption
23°C, 24 hr	0.75	%	ASTM D570, ISO 62
Saturation	5.0	%	ASTM D570
Saturated, 23°C	5.0	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	120		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	9500	MPa	ASTM D638, ISO 527-2
Tensile Strength (Break)	170	MPa	ASTM D638, ISO 527-2
Tensile Elongation (Break)	3.0	%	ASTM D638, ISO 527-2
Flexural Modulus	8200	MPa	ASTM D790, ISO 178
Flexural Stress
--	240	MPa	ISO 178
Fracture	240	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	7.8	kJ/m²	ISO 179
Notched Izod Impact (23°C, 3.20 mm)	110	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	244	°C	ASTM D648, ISO 75-2/A
Continuous Use Temperature	100	°C	ASTM D794
Vicat Softening Temperature	254	°C	ISO 306/B50, ASTM D1525 ¹
Melting Temperature	256	°C
CLTE - Flow (-30 to 30°C)	3.0E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+13	ohms·cm	ASTM D257
Dielectric Strength (2.00 mm)	24	kV/mm	ASTM D149

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.60 mm)	HB		UL 94
Oxygen Index	26	%	ASTM D2863

Additional Information
Granule Humidity, TARO 002: <0.15%Spiral Flow, TARO 003, 280°C - 60°C: 320Ball Pressure Test, VDE 0470: 165°CContinuous Service Temperature, IEC 216, 130 hr: 100°CContinuous Service Temperature, IEC 216, 180 hr, short term: 140°CDensity, ISO 118: 1.36 to 1.38 Mg/m³Density. ASTM D792: 1.36 to 1.38 Mg/m³Notched Izod Impact Strength , ISO 180, 23°C: 110 J/mCharpy Impact Strength, ASTM D256, 23°C, 4mm: 7.8 kJ/m²

Additional Information

Granule Humidity, TARO 002: <0.15%Spiral Flow, TARO 003, 280°C - 60°C: 320Ball Pressure Test, VDE 0470: 165°CContinuous Service Temperature, IEC 216, 130 hr: 100°CContinuous Service Temperature, IEC 216, 180 hr, short term: 140°CDensity, ISO 118: 1.36 to 1.38 Mg/m³Density. ASTM D792: 1.36 to 1.38 Mg/m³Notched Izod Impact Strength , ISO 180, 23°C: 110 J/mCharpy Impact Strength, ASTM D256, 23°C, 4mm: 7.8 kJ/m²

Injection	Nominal Value	Unit
Drying Temperature
--	80.0 - 90.0	°C
Pre-drying equipment	80.0 - 100	°C
Drying Time
--	1.0	hr
Pre-drying equipment	3.0	hr
Processing (Melt) Temp	260 - 280	°C
Mold Temperature	80.0 - 110	°C
Injection Rate	Moderate-Fast

Note Message
1 .	速率 A (50°C/h), 载荷2 (50N)

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Taro Plast S.p.A.
Trademark:	TAROMID A
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5Cvzv9_TAROMID-A-280-G6-MB1.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
MIDILENA III PPF401	ROMPETROL PETROCHEMICALS S.R.L.	PP Homopolymer	MIDILENA III
Topolymer® M-601J	Dongguan Top Polymer Enterprise	TPE	Topolymer®
Nipoflex® 625	TOSOH Corporation	EVA	Nipoflex®
GAPEX® RPP06EB94NA	Ferro Corporation	PP, Unspecified	GAPEX®
Luxus PP 16144	Luxus Limited	PP, Unspecified	Luxus PP