Order Products : sales@su-jiao.com
KRATON® A1536 H
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5BQC5T_KRATON-A1536-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in they physical form identified below:
Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 7.0 | g/10 min | ASTM D1238 |
| Antioxidant Additive | 0.0700 to 0.130 | ||
| Ash Content - S | 0.4 to 0.7 | wt% | |
| Polystyrene Content 1 | 37.0 to 44.0 | wt% | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 65 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 6.45 | MPa | Internal Method |
| Tensile Strength (Yield) | > 34.5 | MPa | Internal Method |
| Tensile Elongation (Break) | 660 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Measured on the polymer before hydrogenation. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (PC) XP 41 R 20 GF | A. Schulman Europe | PC | POLYMAN® |
| TRILOY® 130 | Samyang Corporation | PC+PBT | TRILOY® |
| 3M™ Dyneon™ Fluoroplastic ET 6210AZ | 3M Advanced Materials Division | ETFE | 3M™ Dyneon™ Fluoroplastic |
| Ebalta MG 425 / PUR 19 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| EPIGUM DPE/55 | Crosspolimeri S.p.A. | TPV | EPIGUM |
