Order Products : sales@su-jiao.com

MAJORIS GE460 - 6744

Category:	PP, Unspecified , Polypropylene
Manufacturer:	AD majoris
Trademark:	MAJORIS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5B3nZG_MAJORIS-GE460---6744.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MAJORIS GE460 - 6744 is a special long glass fibre reinforced polypropylene grade, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties.

APPLICATIONS
MAJORIS GE460 - 6744 is intended for injection moulding of highly demanding technical applications.
The excellent properties of MAJORIS GE460 - 6744 make it suitable for:

Electrical components, automotive parts, interior, exterior and under the bonnet, structural furniture parts, load bearing, demanding components for various engineering sectors.

MAJORIS GE460 - 6744 can, in many of these applications, substitute other engineering plastics or metal alloys.

General Information
Filler / Reinforcement	Long glass fiber
Additive	heat stabilizer
Features	Chemical coupling Recyclable materials Heat resistance, high Thermal Stability
Uses	Electrical components Furniture Metal substitution Parts under the hood of a car Car interior parts Automotive exterior parts
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.24	g/cm³	ISO 1183
Molding Shrinkage	0.40	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	9260	MPa	ISO 527-2/1
Tensile Stress (Break)	117	MPa	ISO 527-2/50
Tensile Strain (Break)	2.8	%	ISO 527-2/50
Flexural Modulus ¹	7460	MPa	ISO 178
Flexural Stress ²	165	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	24	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	52	kJ/m²	ISO 179/1eU

Injection	Nominal Value	Unit
Rear Temperature	230 - 250	°C
Processing (Melt) Temp	250 - 280	°C
Mold Temperature	80.0 - 100	°C
Injection Pressure	30.0 - 60.0	MPa
Injection Rate	Slow
Screw Speed	30 - 150	rpm

Injection instructions
Holding pressure: 50 to 70% of the injection pressureBack pressure: as low as possible, 0 to 10%Holding time: as long as practical

Note Message
1 .	2.0 mm/min
2 .	2.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
RAMAPET® FA	Indorama Ventures PCL	PET	RAMAPET®
Cheng Yu E2330	Cheng Yu Plastic Company Limited	PET	Cheng Yu
Estane® 58881 TPU	Lubrizol Advanced Materials, Inc.	TPU-Polyether	Estane®
LG PVC LS100E	LG Chem Ltd.	PVC Homopolymer	LG PVC
SD POLYCA™ 875G20	Sumika Styron Polycarbonate Limited	PC	SD POLYCA™