Order Products : sales@su-jiao.com
Michirene S13200
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | API Polymers, Inc. |
| Trademark: | Michirene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5ALAPg_Michirene-S13200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Michirene S13200 is a general-purpose polystyrene product,. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 9.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 43.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus - Tangent | 3240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Drying is usually not necessary |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 77.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 221 | °C | |
| Processing (Melt) Temp | 227 | °C | |
| Mold Temperature | 49.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA6MG40HSL-BK09 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| Comco PEEK CF 30 | Comco-Plastic GmbH | PEEK | Comco |
| Epolene® N-15 | Westlake Chemical Corporation | PP Homopolymer | Epolene® |
| PLUSTEK PA320G3 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| ALCOM® PC 740/4 UV RD1207-08LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
