Order Products : sales@su-jiao.com
SEETEC LDPE XL610
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | SEETEC LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4ygFDc_SEETEC-LDPE-XL610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SEETEC XL610 resin is produced by ExxonMobil Chemical's autoclave process technology. SEETEC XL610 resin is an excellent raw material in the application of extrusion coating. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Permeability | 200 | cm³·mm/m²/atm/24 hr | ASTM D3985 |
| Water Vapor Transmission Rate (38°C, 90% RH, 25 µm) | 19 | g/m²/24 hr | ASTM F372 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Melting Temperature | 108 | °C | Internal Method |
| Extrusion | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Minimum Coating Weight (315°C) 1 | 10 | g/m² | Internal Method |
| Neck-in | Internal Method | ||
| 315°C 2 | 44.0 | mm | |
| 315°C 3 | 36.0 | mm |
| Note Message | |
|---|---|
| 1 . | Constant Output |
| 2 . | Constant Output, 50 m/min |
| 3 . | Constant Output, 150 m/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 TF2 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| DENISTAT M 00U 03 SC1 | Vamp Tech | Acetal (POM) Copolymer | DENISTAT |
| EPO-TEK® MA-5 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LUVOCOM® 1106-8032/GY/EM | Lehmann & Voss & Co. | PEI | LUVOCOM® |
| PLUSTEK RA303G4 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
