Order Products : sales@su-jiao.com
Kemcor HD 2830
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4xFyqy_Kemcor-HD-2830.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This grade is approved by Telecom Australia for use in telecommunication cables and meets the following raw material specifications: ASTM D1248 - 1984 III A4 Grade E9 BS6234 - 1987 Type HO3 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.40 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 2.0E-4 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sizzle™ HF | Plastic Selection Group, Inc. | PS (GPPS) | Sizzle™ |
| TRILAC® ABS-HS7500 | Polymer Technology and Services, LLC | ABS | TRILAC® |
| Edge™ 8 | Plastic Selection Group, Inc. | TP, Unspecified | Edge™ |
| Iupilon® MB4405U | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| ALCOM® MED PS 1000 AS 14114 | ALBIS PLASTIC GmbH | PS (HIPS) | ALCOM® MED PS |
