Order Products : sales@su-jiao.com
Estane® 58091 TPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4vaLGn_Estane-58091-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58091 is a 70D aromatic Polyester-Based Thermoplastic Polyurethane (TPU). Features: High stiffness TPU alloy Uses: Flat Die/Cast Sheet Extrusion, Pofile Extrusion and Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 67 - 73 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 47.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 0.762 mm) | 28.3 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 29.0 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 160 | % | ASTM D412 |
| Tear Strength 1(0.762 mm) | 193 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -11.0 | °C | DSC |
| Melting Temperature | 106 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 188 | °C | |
| Cylinder Zone 2 Temp. | 194 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 4 Temp. | 205 | °C | |
| Adapter Temperature | 205 | °C | |
| Melt Temperature | 202 | °C | |
| Die Temperature | 205 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G0 202 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| TORZEN® U4830HSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| AKROMID® A3 GM 20/10 4 WIT black (4529) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| AKROMID® A3 GF 15 1 L black (4673) | AKRO-PLASTIC GmbH | Nylon 66+PP | AKROMID® |
| INNOPOL® PP CS 1-3000 DEL | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
