Order Products : sales@su-jiao.com
MAJORIS DT401
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4tB2BF_MAJORIS-DT401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DT401 is a 40% mineral filled polypropylene compound intended for injection moulding. The product is available in both natural (DT401) and black (DT401 - 8229) but other colours can be provided on request. DT401 has a medium flow rate, very good processability and excellent mechanical properties. DT401 has been developed especially for application requiring excellent long- term heat stability. This product is food contact. APPLICATIONS
Products requiring high rigidity, high dimensional stability, low shrinkage and good long term heat resistance, high heat distortion temperature can suitably be made from DT401. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 230°C/2.16 kg | 6.0 | g/10 min | ISO 1133 |
| 230°C/5.0 kg | 27 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.90 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3800 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 32.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Yield) | 7.0 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 3900 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 1.2 | kJ/m² | ISO 179/1eA |
| 23°C | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 20 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 132 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 81.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 100 | °C | ISO 306/B |
| Thermal Stability (150°C) | > 700.0 | hr |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Emission | 29.0 | µgC/g | VDA 277 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 210 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® HTplus R1133 | Evonik Industries AG | PPA | VESTAMID® HTplus |
| Biffa r-PP Natural | Biffa Polymers Ltd | PP, Unspecified | Biffa |
| Durez® 23570 (Compression) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| EnCom HF ABS 7530 | EnCom, Inc. | ABS | EnCom |
| IDI STC 4450B | IDI Composites International | TS, Unspecified | IDI STC |
