Order Products : sales@su-jiao.com
Asrene® UF 2600TQ
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Chandra Asri Petrochemical |
| Trademark: | Asrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4syzgD_Asrene-UF-2600TQ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This material complies with recommendations & statutory regulations in the USA, Japan and most European countries regarding packaging materials intended to come in contact with foodstuff. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | 0.11 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 30 µm | 30.0 | MPa | ASTM D882 |
| TD : Break, 30 µm | 18.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 30 µm | 900 | % | ASTM D882 |
| TD : Break, 30 µm | 800 | % | ASTM D882 |
| Dart Drop Impact 1(30 µm) | 75 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 30.0 µm | 44.1 | kN/m | ASTM D1922 |
| TD : 30.0 µm | 98.1 | kN/m | ASTM D1922 |
| Blocking force (30.0 µm) | 69.0 | g/100 cm² | ASTM D3354 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 104 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 30.0 µm) | 110 | ASTM D2457 | |
| Clarity (30.0 µm) | 72.0 | ASTM D1746 | |
| Haze (30.0 µm) | 6.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 200 | °C |
| Extrusion instructions |
|---|
| Blow-up Ratio: 1.5 to 3.5 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 30YM240 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| SUPREME PP SPEXP56 | Supreme Petrochem Ltd. | PP, Unspecified | SUPREME PP |
| NITRIFLEX N-612 B | NITRIFLEX | NBR | NITRIFLEX |
| Fainplast PVC R 220 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| OnFlex™ HT 40A-3S2131 | PolyOne Corporation | TPE | OnFlex™ |
