Order Products : sales@su-jiao.com
Kumho KTR KTR-602
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Korea Kumho Petrochemical Co., Ltd. |
| Trademark: | Kumho KTR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4pzQpX_Kumho-KTR-KTR-602.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KUMHO KTR ® 602 polymer is a linear block copolymer based on styrene and butadiene with bound styrene of 40.5% mass. It is supplied in two physical forms, identified as follows in the grade nomenclature:
|
| General Information | |
|---|---|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 11 | g/10 min | |
| Ash Content | 0.1 | wt% | |
| Solution Viscosity 1(25°C) | 600 | mPa·s | |
| Styrene Content | 40.5 | wt% | |
| Volatile Matter | 0.50 | wt% |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 91 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (300% Strain) | 5.39 | MPa | |
| Tensile Strength (Break) | 33.3 | MPa | |
| Tensile Elongation (Break) | 820 | % |
| Note Message | |
|---|---|
| 1 . | 5.23 wt% in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reslen PPH 20GF GWT 960 | Polimarky Spolka Jawna | PP Homopolymer | Reslen |
| STAR-THERM® E TA10-3C G | EPIC Polymers | PPA | STAR-THERM® |
| Ultramid® A3Z | BASF Corporation | Nylon 66 | Ultramid® |
| Andur 720 DP/Curene® 442 | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| Huafon JF-P-6881 / JF-I-6820 | Huafon Group Co., Ltd. | PUR-Ester | Huafon |
