Order Products : sales@su-jiao.com
Alcryn® 2380 NC
| Category: | MPR , Melt Processable Rubber |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | Alcryn® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4nRzkF_Alcryn-2380-NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Alcryn® 2380 NC is a Melt Processable Rubber (MPR) material. It is available in Asia Pacific, Europe, or North America. Important attributes of Alcryn® 2380 NC are:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792, ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 79 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | ASTM D1044 | ||
| 1000 g, CS-17 Wheel | 0.00600 | mg | |
| 1000 g, CS-18 Wheel | 0.293 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 13 | % | ASTM D412 |
| Tensile Stress (100% Strain) | 5.03 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 13.8 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 420 | % | ASTM D412, ISO 37 |
| Tear Strength | |||
| 24°C 1 | 43.8 | kN/m | ASTM D624 |
| 24°C | 44 | kN/m | ISO 34-1 |
| Compression Set | |||
| 24°C, 22 hr | 22 | % | ASTM D395A |
| 70°C, 22 hr | 63 | % | ASTM D395A |
| 100°C, 22 hr | 70 | % | ASTM D395A |
| 24°C, 22 hr 2 | 22 | % | ISO 815 |
| 70°C, 22 hr 3 | 63 | % | ISO 815 |
| 100°C, 22 hr 4 | 70 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | |||
| 125°C, 168 hr | 110 | % | ASTM D573, ISO 188 |
| 100% Strain, 125°C, 168 hr | 190 | % | ASTM D573 |
| 100% Strain 125°C, 168 hr | 190 | % | ISO 188 |
| Change in Ultimate Elongation in Air (125°C, 168 hr) | 73 | % | ASTM D573, ISO 188 |
| Change in Volume | |||
| 100°C, 168 hr, in ASTM Oil #1 | -13 | % | ASTM D471 |
| 100°C, 168 hr, in IRM 903 Oil #3 | 0.0 | % | ASTM D471 |
| 100°C, 168 hr, in Water | -26 | % | ASTM D471, ISO 1817 |
| 100°C, 168 hr, in ASTM #1 Oil | -13 | % | ISO 1817 |
| 100°C, 57120 hr, in IRM 903 Oil #3 | 0.0 | % | ISO 1817 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -17.0 | °C | ASTM D746, ISO 812 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (190°C, 300 sec^-1) | 500 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 177 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Type A |
| 3 . | Type A |
| 4 . | Type A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WELLAMID Nylon 6000 GVS 20/10 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| NEFTEKHIM PE 6148C (486H3) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
| DOWLEX™ 2045G | The Dow Chemical Company | LLDPE | DOWLEX™ |
| Generic ABS - Glass Fiber | Generic | ABS | Generic |
| Lumiplas® LD7701FD | LG Chem Ltd. | PC | Lumiplas® |
