Order Products : sales@su-jiao.com

NuSil MED-4920

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4lp5Bl_NuSil-MED-4920.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength. Comments: INJECTION MOLDING ELASTOMER

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.

LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Comments: INJECTION MOLDING ELASTOMER

General Information
Filler / Reinforcement	Silica
Features	Fast Cure Good Colorability High Strength
Uses	Gaskets Medical/Healthcare Applications Overmolding Seals Valves/Valve Parts
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Mechanical	Nominal Value	Unit
Tensile Strength (200% Strain)	0.448	MPa

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	35.0	g/min

Uncured Properties	Nominal Value	Unit
Density	1.13	g/cm³
Curing Time (150°C)	0.083	hr
Pot Life (25°C)	> 1400	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	20
Tensile Strength	6.89	MPa
Tensile Elongation at Break	900	%
Tear Strength	21.9	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP 1405 HF TFE 5	RTP Company	PESU	RTP
Tenite™ Propionate 380A4000015 Clear, Trsp	Eastman Chemical Company	CAP	Tenite™ Propionate
Grilamid® L 20 nat	EMS-GRIVORY	Nylon 12	Grilamid®
HiFill FR® PA4/6 GF30 FR HS X	Techmer Engineered Solutions	Nylon 46	HiFill FR®
Hostacom TRC 454N G71545	LyondellBasell Industries	PP Copolymer	Hostacom