Order Products : sales@su-jiao.com

ALKAMIX™ UHSMB

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4lVQU9_ALKAMIX-UHSMB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX UHSMB is a combined slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 1.6 percent and antiblock additive at a concentration of 9 percent. ALKAMIX MBUHSMB can be added to low dnsity polyethylene (LDPE) or linear low density polyethylene during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is 2% to LDPE and 5% to LLPDE. The maximum level of addition of UHSMB based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 12.5 percent, when added to a polyethylene formulation free of any other additives.

Message

ALKAMIX UHSMB is a combined slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 1.6 percent and antiblock additive at a concentration of 9 percent.

ALKAMIX MBUHSMB can be added to low dnsity polyethylene (LDPE) or linear low density polyethylene during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is 2% to LDPE and 5% to LLPDE.

The maximum level of addition of UHSMB based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 12.5 percent, when added to a polyethylene formulation free of any other additives.

General Information
Additive	Antiblock (9%) Slip (2%)
Features	Antiblocking Slip
Uses	Blending
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.964	g/cm³	ASTM D1505

Resin Grade	Manufacturer	Category	Trademark
Pro-fax SL840	INDELPRO, S.A. de C.V.	PP Copolymer	Pro-fax
Novamid® 1010C2	DSM Engineering Plastics	Nylon 6	Novamid®
AIE PA6 50G4F	Asia International Enterprise (Hong Kong) Limited	Nylon 6	AIE PA6
ESTOPLAST EP 2015	Ester Industries Ltd.	PBT	ESTOPLAST EP
ALTECH® PP-B A 2040/150 GF40	ALBIS PLASTIC GmbH	PP Copolymer	ALTECH® PP-B