Order Products : sales@su-jiao.com
ISOTHANE® G1085A-E
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4kM8FK_ISOTHANE-G1085A-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOTHANE G1085A-E is an 80 Shore A, high performance Polyester-based and environment-friendly TPU based on renewable materials with bio-based content 28%. This renewable resin also features the property- HIGH TRANSPARENCY. Characteristics: ISOTHANE G1085A-E product is polyester poly(adipate)ester based thermoplastic polyurethanes. It exhibits excellent transparency, toughness, abrasive resistance, and solvent resistance. The product can be blow molded. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/8.7 kg) | 11 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 4.20 | MPa | ASTM D412 |
| 100% strain | 6.30 | MPa | ASTM D412 |
| 300% strain | 11.6 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 610 | % | ASTM D412 |
| Tear Strength 1 | 140 | kN/m | ASTM D624 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Biobased Content | 28.0 |
| Injection | Nominal Value | ||
|---|---|---|---|
| Screw L/D Ratio | 25.0:1.0 | ||
| Screw Compression Ratio | 3.0:1.0 |
| Injection instructions |
|---|
| Feed Section: 180 °CTransition Section: 185 °CMetering Section 1: 185 °CMetering Section 2: 185 °CDie: 180 °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SFW4500 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| THERMOLAST® K TC5FLN (Series: FR/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Vipel® F013-AAA-00 | AOC, L.L.C. | Vinyl Ester | Vipel® |
| BP RPP 2012 TR BLK | Buckeye Polymers, Inc. | PP, Unspecified | BP |
| Sylvin 7833-85 Red 6285 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
